Wide 5 Billet Hub - Kit, Floater Style
Available in a kit or bare.
Kit includes: Races, Bearings, Rotor Flange, Seals, Spindle Nut and Studs. Just add the appropriate Dust Cover and Drive Flange to complete your assembly. Bare Hub includes: Races, Studs, Seal Retainer & Rotor Flange. JOES Billet hubs feature many improvements over conventional designs. The rear seal slips easily into an O-ring sealed bore and is held in place by JOES Seal Retainer System. JOES Seal Retainer System prevents the seal from slipping when the hub gets hot and allows you to reuse seals over and over – just slip expensive seals in with your fingers and lose the hammer. JOES Billet hubs are precision machined from 6061-T6 aluminum. JOES Rotor flange can be bolted directly on the Wide 5 or 5x5 floater style. The rotor flange is drilled for 8 bolt rotors and is slotted to reduce weight and heat transfer into the hub. The optional T-nuts improve braking and reduce drag. Use the fill plug and run these hubs wet for reduced drag or use conventional grease. *T-nuts, Drive Flange and Dust Covers sold separately.
- Item Requires Shipping
- 14.0 lbs.
- W13.0000” x H13.0000” x L7.0000”
Total Reviews (0)
Write the First Review!
You must login to post a review.