Additional Images

JOES J-Bar Bracket - Pinion Mount

11605
JOES J-Bar Bracket - Pinion Mount
Pricing: $188.95
Qty:

Description

JOES J-Bar Bracket has been updated for easier roll center adjustments. It now has a climber nut so you can easily move your J-bar up or down and has 5" of travel. The bodies are machined from 6061-T6 aircraft aluminum and designed to fit on quick change rear ends. Seal, O-Ring and grade 8 fasteners are included. Supersedes p/n 11600

Product Series

Installation Instructions

  1. As rear end materials vary we strongly recommend you consult your rear end manufacturer for the torque specs for the (12) 3/8-16 bolts that hold the bracket to the center section. Aluminum or magnesium threads can be damaged easily and proper torque is vital.
  2. Adjust your J-Bar height and verify that the 3/4" bolt is tight and race ready.
  3. Inspect the bracket for damage and check torque settings weekly before the car hits the track.

NOTE: JOES J-bar Bracket has an O-ring seal on the backside. When installing the bracket ensure that the seal is installed properly into the groove.

Installation Instructions

  1. As rear end materials vary we strongly recommend you consult your rear end manufacturer for the torque specs for the (12) 3/8-16 bolts that hold the bracket to the center section. Aluminum or magnesium threads can be damaged easily and proper torque is vital.
  2. Adjust your J-Bar height and verify that the 3/4" bolt is tight and race ready.
  3. Inspect the bracket for damage and check torque settings weekly before the car hits the track.

NOTE: JOES J-bar Bracket has an O-ring seal on the backside. When installing the bracket ensure that the seal is installed properly into the groove.

Shipping Information

  • Item Requires Shipping
  • 13.0 lbs.
  • W13.0000” x H13.0000” x L5.0000”

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.