Additional Images

Tire Pressure Gauge, 0 - 15 PSI

32305
Tire Pressure Gauge, 0 - 15 PSI
Pricing: $20.95
Qty:

Description

JOES Tire Pressure Gauges come with a 2-1/2" glow-in-the-dark dial face, air pressure release button, internal gauge damper, and a 17" ultra flexible hose with a swivel chuck. We include a pre-installed chrome angle chuck as well as a ball chuck so that you can swap them based on your preference. A hold valve to store the pressure in the gauge until you release it is available for an additional cost.

Product Series

Additional Information

CAUTION: Be sure to use your tire gauge within the dial face range. Overloading your gauge even one time can and will cause permanent damage. Dropping the gauge can affect accuracy of your precision pressure measuring device. Overloading or dropping your gauge voids the warranty.

Tire Gauges are more accurate in the center of the range. If you commonly run 30 PSI than a 60 PSI gauge is best. If you commonly run 7 PSI then a 15 PSI gauge would be recommended.

NOTE: This model of gauge has a “Bleed” button that drains air to fine tune pressure when you overfill beyond your desired number. To bleed off excess pressure simply push the bleed button to drain down to the desired pressure.

A "Hold" feature to hold the pressure on the gauge is a different part number. See product number 32308, 32309, 32310

Additional Information

CAUTION: Be sure to use your tire gauge within the dial face range. Overloading your gauge even one time can and will cause permanent damage. Dropping the gauge can affect accuracy of your precision pressure measuring device. Overloading or dropping your gauge voids the warranty.

Tire Gauges are more accurate in the center of the range. If you commonly run 30 PSI than a 60 PSI gauge is best. If you commonly run 7 PSI then a 15 PSI gauge would be recommended.

NOTE: This model of gauge has a ?Bleed? button that drains air to fine tune pressure when you overfill beyond your desired number. To bleed off excess pressure simply push the bleed button to drain down to the desired pressure.

A "Hold" feature to hold the pressure on the gauge is a different part number. See product number 32308, 32309, 32310

Shipping Information

  • Item Requires Shipping
  • 2.0 lbs.
  • W7.0000” x H13.0000” x L5.0000”

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.