Showing 1–24 of 26 results

Show Filters

JOES -8 AN Suzuki GSXR600 Front Water Housing

$62.95
Switch your front inlet coolant line to -8AN on your ’07 and newer GSXR 600 and optimize cooling system flow

JOES Clamp On Radiator Brackets

$199.95
JOES Radiator Brackets simplify radiator installation and removal while securely mounting your radiator at any angle. The brackets easily clamp

JOES -12AN Suzuki Thermostat Housing

$69.95
Eliminate that rubber hose and worm drive clamp on your thermostat housing and switch over to high performance hose with

JOES -12 AN Yamaha Thermostat Housing

$69.95
Most people already use AN fittings for there cooling system, so why let the thermostat housing be the exception? The

JOES Expansion Tanks

$99.95
Installing a JOES Expansion Tank will help keep your engine cool! A ¼” NPT fitting is welded in at the

Allstar Stant 28-32 PSI Standard Size Non Recovery Radiator Cap

$18.99
The Stant Radiator Cap is designed to provide higher cooling system pressure which raises the boiling point of coolant to

JOES Fan Spacers

$64.95$89.95
JOES Fan Spacers are made from billet aluminum and are anodized black. Machined spacers are available in 1″, 2″, 3″,

JOES Radiator Filler Neck

$25.95
High quality machining from billet aluminum makes our radiator neck the choice for fabricators that are building their own tanks

JOES Yamaha Front Water Housing

$62.95
Replace your cast aluminum factory water housing with this billet aluminum housing and upgrade to AN lines and fittings. Eliminates

JOES Replacement Radiator Core Retainer

$16.95
Replacement Radiator Core Retainer for JOES Radiator Mount Assembly

Allstar Push-Through Electric Fan Mount Kit

$9.99
Mounting kits are commonly used to mount electric fans, oil coolers, transmission coolers or honeycomb screen directly to a radiator.

SPAL 7½” Low Profile Push Style Electric Cooling Fan

$74.95
12V Fan, 15A Fuse Recommended 348 CFM Pusher with Straight Blades 8.27″ x 7.95″ x 2.05″ Overall Dimensions Works well

Allstar Stant Mini Recovery System Radiator Cap

$15.99
Allstar Radiator Cap Small Stant 28-32 PSI Higher cooling system pressure raises the boiling point of coolant to reduce the

FSR Micro Sprint Radiators

$358.00$440.00
Known Compatibilities: Farrell Frameworks & PMP Chassis. 18″ x 10″ Fittings: (2) #12 AN & (1) #8 AN Does NOT

Allstar Radiator Inlet Fitting – 16AN

$22.99
Fitting, Radiator Inlet, Straight, 16 AN to 1⅝”-12 Male O-Ring, Aluminum, Clear Anodize, Allstar Radiators

Allstar Electric Fans

$92.99$109.99
Electric fans require very little amperage and are suitable for use in race car or tow vehicle. Fans are set

PWR Pressurized Water Kit

$839.00
Pressurized Water Kit – 4” Pressure can w/ Side Mount PRV & Mount This system is more efficient than customary

Allstar Radiator Inlet Fitting

$22.99
Fitting, Radiator Inlet, Straight, 1½” Hose Barb to 1⅝”-12 in Male O-Ring, Aluminum, Clear Anodize, Allstar Radiators

Allstar Dual Pass Aluminum Radiator

$234.99
This Allstar Dual pass radiator circulates coolant across the top half of the radiator, then back across the bottom half,

SPAL AMP Electric Fan Wiring Harness

$11.69
Designed to work with most SPAL electric fans For 12V systems only Features reliable AMP style connectors

PWR Pressure Can Mounting Bracket

$20.00
Designed for use with the PWR 4″ Pressure Can only Note: Bracket is included in the PWR75-00503 Pressurized Water Kit

PWR Pressure Relief Valve

$269.00
A Pressure Relief Valve (PRV) is used instead of a Radiator Cap in a cooling system. Recover Quicker than a

PWR 4″ Pressure Can

$419.00
This new pressure can mounts the PRV in the side of the can verses the top of the can to

PWR Radiator w/ Oil Cooler Module & 13″ SPAL Fan

$1,129.00
The Lightweight Late Model Package is built for Pavement Late Model Racing. This package is built with PWR’s Extruded Tube