Showing 1–24 of 83 results

Show Filters
Show 9 24 36
Clear filters

Allstar Coated Steel Braided Brake Lines with Aluminum Ends, Straight/90°

$12.99 – $32.89
Black coated braided steel lines have black aluminum ends. -2AN, -3AN or -4AN Female straight on one end and straight
Select options
Quick view

Allstar Aluminum Hood Pin Kit

$11.99 – $13.99
Hood Pin kits come with 2 ea of Black Anodized Aluminum Pins, Scuff Plates, Torsion Clips, and 4 Jam Nuts.
Select options
Quick view

Allstar Double Ended Drill Bits

$6.99
Double ended bits are basically two bits in one. Convenient bit can be flipped around for a fresh sharp bit
Select options
Quick view

Allstar Brass Bolt-In Valve Stem

$4.99
Allstar Performance Valve Stem, Brass, ⅝” in rim hole, Bolt-In.
Add to cart
Quick view

Allstar Stant 28-32 PSI Standard Size Non Recovery Radiator Cap

$18.99
The Stant Radiator Cap is designed to provide higher cooling system pressure which raises the boiling point of coolant to
Add to cart
Quick view

Allstar Rubber Valve Stem, 0.453″ Hole, 4 Pack

$3.99
Economical rubber valve stems pull through wheel for easy installation. Small stem for .453″ hole is commonly found in stock
Add to cart
Quick view

Allstar Racers Tape

$10.49
A must for all racers in the shop or at the track. True “Racer’s Tape”. Comes in white, red, black,
Select options
Quick view

Allstar Track Mat, Black, 24″ x 52″

$44.99
Mats fold for easy storage and are ideal for use on asphalt, dirt, in the pits or on the garage
Add to cart
Quick view

Allstar Pin Type Cleco Fasteners

$10.69
Cleco pins are reusable and easily make a temporary connection between pieces of sheet metal during fitting. Pins will work
Select options
Quick view

Allstar Steel Tapered Spacers ½” ID

$4.29 – $4.59
Universal spacers have many uses including spacing rod ends on linkages to prevent binding or just to provide clearance. Spacers
Select options
Quick view

Allstar Shock Travel Indicator Kit

$43.99 – $47.99
Check compression and rebound travel of coil-over shocks at a glance. Clamp aluminum bracket portion of the kit directly to
Select options
Quick view

Allstar Black Gaffers Tape

$24.99
Vinyl coated gaffer’s tape has a dull appearance and is much stronger than standard racer tape.
Add to cart
Quick view

Allstar Coil Over Bracket, Flat Mount

$7.89
Weld-on shock brackets mount standard and coil-over shocks with ½” I.D. inner bushing or ½” rod end to chassis as
Add to cart
Quick view

Allstar Pit Extension w/ Hex Socket, ½” Drive

$49.99 – $51.99
No more extensions slipping off. 1″ hex socket is available in 5″ or 12″ lengths. Clears beadlock ring on Weld
Select options
Quick view

Allstar Aluminum Quick Drain Pan

$54.99
Aluminum drain pan is handy when changing quick-change gears. Built-in perforated shelf holds gears and allows lube to drain into
Add to cart
Quick view

Allstar Aluminum Flange Type Tri-fold Rivet, 250 pk

$44.99 – $49.99
Tri-fold rivets have a perforated body that opens and expands to create a large backside surface area, eliminating the need
Select options
Quick view

Allstar Steering Shaft Support Kit

$11.99
Mounts to steering column bracket to hold steering shaft in place. Kit includes one rod end and two steel ¾”
Add to cart
Quick view

Allstar Brake Duct Hose

$79.99
Flexible, non-kink hose directs air from front ducts to spindle ducts. 3″ I.D. Hose that withstands temperatures up to 300°.
Add to cart
Quick view

Allstar Step Drill Bit Kit, 3pk

$19.99
Drill multiple size holes with one bit. Drill sheet metal and aluminum without deforming or distorting. Bits start on contact,
Add to cart
Quick view

Allstar Push-Through Electric Fan Mount Kit

$9.99
Mounting kits are commonly used to mount electric fans, oil coolers, transmission coolers or honeycomb screen directly to a radiator.
Add to cart
Quick view

Allstar Screw-In Lower Ball Joint

$25.99
Fits Lefthander chassis style lower control arm or where a large screw-in type ball joint is required. (Replaces – Moog
Add to cart
Quick view

Allstar Chevy V8 Motor Mounts

$9.99 – $13.99
Mounts are designed for fabricated chassis or stock chassis that have fabricated motor mounts attached to the frame. Solid style
Select options
Quick view

Allstar Screw-In Lower Ball Joint Sleeve

$14.99
This ball joint sleeve is used in the construction of lower control arms and commonly referred to as the ‘Large
Add to cart
Quick view

Allstar Brake Line Adapters -3 to ³/₁₆” Inv Flare, 2pk

$7.99
Brake Line Adapter – Clip-In – 3 AN Male to ⅜”-24 in Inverted Flare Female – Steel – Zinc Oxide
Add to cart
Quick view