Showing 1–36 of 85 results

Show Filters

Allstar Coated Steel Braided Brake Lines with Aluminum Ends, Straight/90°

$12.99$32.89
Black coated braided steel lines have black aluminum ends. -2AN, -3AN or -4AN Female straight on one end and straight

Allstar Aluminum Hood Pin Kit

$11.99$13.99
Hood Pin kits come with 2 ea of Black Anodized Aluminum Pins, Scuff Plates, Torsion Clips, and 4 Jam Nuts.

Allstar Double Ended Drill Bits

$6.99
Double ended bits are basically two bits in one. Convenient bit can be flipped around for a fresh sharp bit

Allstar Brass Bolt-In Valve Stem

$4.99
Allstar Performance Valve Stem, Brass, ⅝” in rim hole, Bolt-In.

Allstar Stant 28-32 PSI Standard Size Non Recovery Radiator Cap

$18.99
The Stant Radiator Cap is designed to provide higher cooling system pressure which raises the boiling point of coolant to

Allstar Rubber Valve Stem, 0.453″ Hole, 4 Pack

$3.99
Economical rubber valve stems pull through wheel for easy installation. Small stem for .453″ hole is commonly found in stock

Allstar Racers Tape

$10.49
A must for all racers in the shop or at the track. True “Racer’s Tape”. Comes in white, red, black,

Allstar Track Mat, Black, 24″ x 52″

$44.99
Mats fold for easy storage and are ideal for use on asphalt, dirt, in the pits or on the garage

Allstar Pin Type Cleco Fasteners

$10.69
Cleco pins are reusable and easily make a temporary connection between pieces of sheet metal during fitting. Pins will work

Allstar Steel Tapered Spacers ½” ID

$4.29$4.59
Universal spacers have many uses including spacing rod ends on linkages to prevent binding or just to provide clearance. Spacers

Allstar Shock Travel Indicator Kit

$43.99$47.99
Check compression and rebound travel of coil-over shocks at a glance. Clamp aluminum bracket portion of the kit directly to

Allstar Black Gaffers Tape

$24.99
Vinyl coated gaffer’s tape has a dull appearance and is much stronger than standard racer tape.

Allstar Coil Over Bracket, Flat Mount

$7.89
Weld-on shock brackets mount standard and coil-over shocks with ½” I.D. inner bushing or ½” rod end to chassis as

Allstar Pit Extension w/ Hex Socket, ½” Drive

$49.99$51.99
No more extensions slipping off. 1″ hex socket is available in 5″ or 12″ lengths. Clears beadlock ring on Weld

Allstar Aluminum Quick Drain Pan

$54.99
Aluminum drain pan is handy when changing quick-change gears. Built-in perforated shelf holds gears and allows lube to drain into

Allstar Aluminum Flange Type Tri-fold Rivet, 250 pk

$44.99$49.99
Tri-fold rivets have a perforated body that opens and expands to create a large backside surface area, eliminating the need

Allstar Steering Shaft Support Kit

$11.99
Mounts to steering column bracket to hold steering shaft in place. Kit includes one rod end and two steel ¾”

Allstar Step Drill Bit Kit, 3pk

$19.99
Drill multiple size holes with one bit. Drill sheet metal and aluminum without deforming or distorting. Bits start on contact,

Allstar Push-Through Electric Fan Mount Kit

$9.99
Mounting kits are commonly used to mount electric fans, oil coolers, transmission coolers or honeycomb screen directly to a radiator.

Allstar Safety Window Nets

$24.99$26.99
Durable polypropylene nets are available in a variety of sizes and offer additional safety to the driver. Webbing is double

Allstar Screw-In Lower Ball Joint

$25.99
Fits Lefthander chassis style lower control arm or where a large screw-in type ball joint is required. (Replaces – Moog

Allstar Chevy V8 Motor Mounts

$9.99$13.99
Mounts are designed for fabricated chassis or stock chassis that have fabricated motor mounts attached to the frame. Solid style

Allstar Screw-In Lower Ball Joint Sleeve

$14.99
This ball joint sleeve is used in the construction of lower control arms and commonly referred to as the ‘Large

Allstar Screw-In Upper Ball Joint

$18.99
Most popular upper joint used. Originally used in Dodge, Chrysler and Plymouth cars. Fits Allstar ball joint holders and Lefthander

Allstar Brake Line Adapters -3 to ³/₁₆” Inv Flare, 2pk

$7.99
Brake Line Adapter – Clip-In – 3 AN Male to ⅜”-24 in Inverted Flare Female – Steel – Zinc Oxide

Allstar Steel Clevis

$12.49$14.99
Clevis, ⅜” wide with ⅜” or ½” hole.  ⅝” or ¾” RH Male Thread, Steel, Cadmium.

Allstar Cleco Pliers

$11.99
Unique tool easily installs and removes Cleco pins.

Allstar Adjustable Ride Height Strut 15″-24″

$95.99
Stick replaces the coil over shock and spring assembly during maintenance. Stick has many uses and may be adjusted to

Allstar Bearing Spacer

$52.99$62.99
Spacers fit between inner and outer bearings. Prevents over tightening and consistently set bearing pre-load while reducing bearing drag. Steel

Allstar Pistol Grip Grease Gun

$19.99
Allstar Performance Grease Gun 12 inch filler hose 14 ounce cartridges Steel, Zinc Oxide Air Bleeder Valve

Allstar Heel Riser

$19.99
Aluminum heel risers are pre-drilled for easy mounting and include a non-skid pad. 4½” wide.

Allstar Plastic AN Dust Cap Kits

$4.59$8.99
Allstar Performance Plastic Dust Caps -3AN to -16AN Kit Sizes include -3AN, -4AN, -6AN, -8AN, -10AN, -12AN, -16AN 5 of

Allstar Steel Spindle Nut Kit

$16.99
2″ pin kit for Allstar, Howe, PCR, and JOES 5 x 5 and most Wide 5 hubs includes a retaining

Allstar Lightweight Hood Pin, Pair, 3/8″ OD

$14.99
These lightweight hood pins are perfect for securing hoods, deck lids, service panels etc. 3/8″ Diameter 2-3/4″ Long 1-5/8″ Diameter

Allstar Brake Line Adapter

$9.99
Bulkhead style aluminum fittings adapt ³/₁₆” inverted flare line to an AN type fitting. The ⁹/₁₆” threaded body with attaching

Allstar Shock Eye Socket

$38.99
The ideal tool for shock rebuilders or anyone that disassembles shocks on a regular basis! Unique socket safely removes and