Showing 1–24 of 39 results

Show Filters

Allstar Coated Steel Braided Brake Lines with Aluminum Ends, Straight/90°

$12.99$32.89
Black coated braided steel lines have black aluminum ends. -2AN, -3AN or -4AN Female straight on one end and straight

Allstar Heated Tire Groover Blades

$18.99$21.99
Hard tempered spring steel blades are designed for use with the ALL10270 Heated Tire Groover. Blades are honed to a

Allstar Double Ended Drill Bits

$6.99
Double ended bits are basically two bits in one. Convenient bit can be flipped around for a fresh sharp bit

Allstar Rubber Valve Stem, 0.453″ Hole, 4 Pack

$3.99
Economical rubber valve stems pull through wheel for easy installation. Small stem for .453″ hole is commonly found in stock

Allstar Racers Tape

$10.49
A must for all racers in the shop or at the track. True “Racer’s Tape”. Comes in white, red, black,

Allstar Track Mat, Black, 24″ x 52″

$44.99
Mats fold for easy storage and are ideal for use on asphalt, dirt, in the pits or on the garage

Allstar Steel Tapered Spacers ½” ID

$4.29$4.59
Universal spacers have many uses including spacing rod ends on linkages to prevent binding or just to provide clearance. Spacers

Allstar Shock Travel Indicator Kit

$43.99$47.99
Check compression and rebound travel of coil-over shocks at a glance. Clamp aluminum bracket portion of the kit directly to

Allstar Black Gaffers Tape

$24.99
Vinyl coated gaffer’s tape has a dull appearance and is much stronger than standard racer tape.

Allstar Coil Over Bracket, Flat Mount

$7.89
Weld-on shock brackets mount standard and coil-over shocks with ½” I.D. inner bushing or ½” rod end to chassis as

Allstar Aluminum Flange Type Tri-fold Rivet, 250 pk

$44.99$49.99
Tri-fold rivets have a perforated body that opens and expands to create a large backside surface area, eliminating the need

Allstar Step Drill Bit Kit, 3pk

$19.99
Drill multiple size holes with one bit. Drill sheet metal and aluminum without deforming or distorting. Bits start on contact,

Allstar All-In-One Heated Tire Groover

$425.99
Self-contained groover has built-in temperature controls eliminating the additional cord and separate control box common with other groovers. Don’t let

Allstar Brake Line Adapters -3 to ³/₁₆” Inv Flare, 2pk

$7.99
Brake Line Adapter – Clip-In – 3 AN Male to ⅜”-24 in Inverted Flare Female – Steel – Zinc Oxide

Allstar Pistol Grip Grease Gun

$19.99
Allstar Performance Grease Gun 12 inch filler hose 14 ounce cartridges Steel, Zinc Oxide Air Bleeder Valve

Allstar Plastic AN Dust Cap Kits

$4.59$8.99
Allstar Performance Plastic Dust Caps -3AN to -16AN Kit Sizes include -3AN, -4AN, -6AN, -8AN, -10AN, -12AN, -16AN 5 of

Allstar Lightweight Hood Pin, Pair, 3/8″ OD

$14.99
These lightweight hood pins are perfect for securing hoods, deck lids, service panels etc. 3/8″ Diameter 2-3/4″ Long 1-5/8″ Diameter

Allstar Brake Line Adapter

$9.99
Bulkhead style aluminum fittings adapt ³/₁₆” inverted flare line to an AN type fitting. The ⁹/₁₆” threaded body with attaching

Allstar Hose Adapter 2½” to 1¼”

$21.99
Adapter fits most helmet hoses with 1¼” ends and has a 2¾” O.D. to fit inside 3″ duct style hose

Allstar Tearoff Post Kit, 2 pk

$17.49
Unique aluminum tear off posts have a second set-screw locking the posts to the shield so they don’t continuously come

Allstar Wire Ties

$6.99$13.99
Secure electrical wiring, gauge lines and roll bar padding. 100 per bag. Available in lengths of either 7.25″ or 14.25″

Allstar 2″ Grease Gun Tip

$5.49
The 2″ tip allows for reaching tight areas such as U-joints. 2″ Tip replaces standard tip on most grease guns

Allstar Radiator Inlet Fitting – 16AN

$22.99
Fitting, Radiator Inlet, Straight, 16 AN to 1⅝”-12 Male O-Ring, Aluminum, Clear Anodize, Allstar Radiators

Allstar Brake Line Adapter Mounting, Bolt-On Tabs, 2 pk

$9.69
Secure brake line adapters with bolt-on brackets. Bolt-on bracket has two ³/₁₆” mounting holes.