Showing 73–108 of 117 results

Show Filters

Bully Aluminum Jackshaft Pulley Ring

$63.95
57 tooth, 30mm wide aluminum pulley. This pulley is used in conjunction with Bully aluminum pulley hubs (BUL151-034).

Bully Aluminum Baskets

$74.95$76.95
Blue, aluminum basket used for 2 or 3 disc Bully clutches.

Bully Steel Basket

$67.95
Steel basket for use on the 3 and 4 disc Jackshaft clutch.

JOES Jr Sprint 23 Tooth Splined Rear Axle, 1½” Diameter

$329.95
JOES JR Sprint Splined Axle is stronger, lighter, and more adjustable compared to our previous steel axle. It is 1½”

JOES Jr Sprint Rotor Carrier for 1½” Axle

$64.95
JOES Jr Sprint Rotor Carriers are made to fit JOES 1½” splined rear axles. They have four ⁵/₁₆”-24 threaded holes

JOES Replacement Jack Shaft Butterfly Clamps

$36.95
Jack Shaft Replacement Butterfly Clamps come in a kit to replace damage that can occur from your Kart grinding on

JOES Quarter Midget Brake Rotor Hub

$34.95
JOES Quarter Midget Brake Rotor Hubs are fully radiused and pocketed for maximum weight savings and strength. Includes Screws (10/32

Comet Kart Brake Rod Clevis Pin

$0.75
M6 steel pin for the Comet Kart Steel Clevis for Throttle or Brake Rods.

JOES Jr Sprint Flush-Mount Butterfly Clamp Set

$36.95
JOES Flush-Mount Butterfly Clamp Set is designed clamp down your Jack Shaft/Engine Mount, while leaving nothing hanging below the frame

Tiger 5×5 Brake Bracket Assembly

$96.95
Tiger 5×5 Brake Brackets fit cambered snouts and include all the necessary fasteners to bolt it to your axle tube.

Tiger Axle Tube w/ 16-Bolt Built In Adapter

$178.51$222.20
Tiger Axle Tubes are available in standard DOM steel or in 4130 Chromoly steel. The advantage of the Chromoly tube

Hegar Yamaha Belt Driver Nut

$22.95
Standard replacement nut for all Hegar Yamaha KT100 belt drivers. ¾” long.

Hegar KT100 Belt Driver Sleeves

$64.95
Fits the Hegar4 18-22 tooth driver hubs.

JOES Jr Sprint Complete Rear Axle, 1½”

$1,124.95
JOES JR Sprint Splined Axle is stronger, lighter, and more adjustable compared to our previous steel axle. It is 1½”

Max Torque Centrifugal Clutch

$49.95$85.95
¾” Bore, 35 Chain, 10, 11, or 12 tooth centrifugal clutch. Comes complete with set screws. ³/₁₆” x ³/₁₆” x

JOES Jr Sprint Caliper Carrier for 1½” Axle

$89.95
JOES Junior Sprint Brake Caliper Carriers for JOES 1½” splined rear axles are lightweight while still maintaining strength. Close tolerances

Allstar Quick Change Gear Cover Gasket

$2.99
Differential Cover Gasket, Paper, Quick Change

Jones Drive Kit SBC, Crate, Power Steering, Water Pump, & Alternator With Fan

$2,242.70
Jones Racing Products Drive Kit Save horsepower, reduce harmonics, and experience unparalleled lightweight design and longevity High quality at an

Tiger Rear Cover Bearing

$52.95
Replacement bearing for quick change rear end cover, including snap ring. 80mm OD (3.1496″) x 25mm ID (.9843″) x 21mm

Tiger 8-Bolt 5×5 Axle Tube Snout w/ Brake Bracket Collar

$174.80
Tiger snouts are manufactured out of high quality steel and allow you to change the handling characteristics of your car

Quarter Master 5½” Friction Disc Packs

$185.95$267.95
Quarter Master® Friction Disc Packs feature an advanced friction formula developed from rigorous testing and feedback in the NASCAR Sprint

Hegar Belt Drive Puller

$29.95
Screw in to the main body of your Hegar belt driver to remove from crank. For use with all Yamaha

Bully Jackshaft Sprockets

$35.95
Jackshaft clutch sprocket. Uses new style snap ring (098-028) to attach sprocket to basket.

JOES Junior Sprint Motor Mount

$349.95
JOES V2 Junior Sprint Motor Mount allows you to easily set your chain for maximum performance and minimum drag. Maximize

Tilton 800-Series Overhung Pedal Assembly

$565.25
Pedal Assembly, 800-Series, Firewall Mount, Aluminum, Black, Brake, Clutch Pedal

Comet Kart Steel Clevis for Throttle and Brake Rods

$4.95
¼”-28 thread pitch steel clevis for throttle and brake rods.

Tiger Wide 5 Brake Bracket Assembly

$96.95
Tiger Wide 5 Brake Brackets fit cambered and non cambered snouts and include all the necessary fasteners to bolt it

Tiger 8-Bolt Wide 5 Axle Tube Snout w/ Brake Bracket Collar

$174.80
Tiger snouts are manufactured out of high quality steel and allow you to change the handling characteristics of your car

Fel-Pro Quick Change Cover Gasket

$10.99
6-Hole Cover Steel Core, Non-Stick Coating Gasket Thickness ¹/₃₂”

Quarter Master Aluminum Bellhousing Kit

$2,315.95$3,501.95
Quarter Master® offers a wide variety of aluminum bellhousing kits using 5½″ and 7¼″ diameter clutches. Designed with the latest

Quarter Master Flywheel to Crank Bolt Kit

$53.95
Flywheel Bolt Kits from Quarter Master® feature custom ARP bolts that fit applications perfectly every time. No guesswork or measurements

Quarter Master Street Stock 10.4″ Clutch Cover w/ Iron Pressure Plate

$284.95
Replacement clutch cover for Street Stock 10.4″ clutches Includes cover w/ iron pressure plate

Quarter Master Hydraulic Throw Out Bearing for 10½” & Larger Clutches

$327.95
Quarter Master® Hydraulic Street Release Bearings are designed to be used with OE-style clutches that require the use of a

Winters Bolt On Spindle, Wide 5, 8 bolt

$135.93$214.88
Winters closed tube, 8 bolt Spindles (axle tube snouts) come in 4 different camber options. Wide 5 hub spacer with

Winters Rear End, Sprint Center, 10 Inch

$2,519.11$4,431.09
SHIPPING MUST BE QUOTED AT TIME OF PURCHASE – PLEASE CALL 425.267.9199 TO SCHEDULE SHIPPING Closed Tube Winters Sprint Aluminum

Winters Billet Gear Cover

$349.45
Winters billet gear cover for 6 bolt Sprint rear ends with retainer