Showing 49–72 of 84 results

Show Filters

Draco 4″ Spring/Shock Covers

$49.63
Fits 4″ diameter shocks. Sold as pairs of 2.

Allstar Steel Clevis

$12.49$14.99
Clevis, ⅜” wide with ⅜” or ½” hole.  ⅝” or ¾” RH Male Thread, Steel, Cadmium.

Allstar Adjustable Ride Height Strut 15″-24″

$95.99
Stick replaces the coil over shock and spring assembly during maintenance. Stick has many uses and may be adjusted to

Swift Round Wire Bump Springs

$99.00$109.00
Swift linear bump springs offer the highest measurable shock stroke in the industry. Unlike inefficient rubber and foam bump stops,

Swift 2″ Bump Spring Retainer

$35.00
Spring retainers for round wire bump springs. Round Wire Bump Springs Swift linear bump springs offer the highest measurable shock

JOES Upper Ball Joint Replacement Shaft

$40.95
Replacement Shaft Only for JOES Upper Ball Joint. Taper = 1.5 (Equivalent to Mustang II)

JOES V2 A-Arm Fixture

$419.95
NOW YOU CAN BUILD ANY A-ARM YOU WANT TO BUILD WITH THE SAME TOOL WE USE IN PRODUCTION! We’ve been

Landrum Bump Springs

$64.99
Bump Springs – are used in conjunction with a primary spring to allow a race car to have a relatively soft initial spring rate to

Maxima 3WT Synthetic Racing Shock Fluid

$19.95
Full-synthetic, ester-based shock fluid designed to ensure maximum performance and provide maximum protection under the most severe conditions. Shear stable,

Tiger Axle Tube w/ 16-Bolt Built In Adapter

$178.51$222.20
Tiger Axle Tubes are available in standard DOM steel or in 4130 Chromoly steel. The advantage of the Chromoly tube

Buzze Racing Slug Style Rack Eye

$144.95
Take the headaches out of optimizing your bump steer by switching to the same BUZZE Racing Slug Style Rack Eyes

Howe Upper Ball Joint Housing

$68.20
Howe Precision Ball Joints offer the precision of a spherical bearing with the misalignment range of a ball joint. Their

JOES Rear Mount & Caliper Mount Installation Kit

$34.95
JOES Rear Mount Installation Kit makes mounting rear end brackets easy. We provide the correct drill and tap and give

Allstar Universal Lower Control Arm, Unwelded

$119.99
Universal kits are 2″ longer than standard arms and must be cut to length before welding slug into place. Ball

JOES 3rd Link Mounts

$79.95
Locate your car’s third member securely with a pair of JOES 3rd Mounts. Made from 6061-T6 aluminum. Sold in pairs.

Allstar 2″ Diameter Shock Covers

$37.99
These neoprene covers are perfect for protecting shock shafts and covering bump set ups. Fit 2″O.D. shocks Not for use

Landrum Bump Springs Retainers

$49.99
Bump Cups and the ST Springs are available individually. 14mm (and/or ½) Bump Cups  – Fit 14mm (and/or 1/2) Shock

Buzze Racing Rack Eye Slug Kit

$109.95
Dial in your bump steer with 1/32” accuracy using this BUZZE Racing Rack Eye Slug Kit. Designed to be used

Allstar Coil Over Bracket, Narrow

$6.99
Bracket welds parallel onto round tubing. Bracket is typically mounted above or below tubing and includes ½” shock mounting hardware.

JOES Billet Aluminum Setup Plate, 4-Lug

$299.95
SPECIFICALLY MADE TO FIT U.S. LEGENDS CARS, MINI STOCKS, AND OTHER 4 LUG CLASSES SOLD INDIVIDUALLY (qty 1 = 1

Lefthander Clamp On Axle Mount Bracket For Panhard Bar

$57.49
Allows changes of roll center height by loosing up clamp and pivot bracket up or down Removable Caps Fits 3″

Howe Lower Ball Joint

$103.85$114.40
Howe Precision Ball Joints offer the precision of a spherical bearing with the misalignment range of a ball joint. Their

Howe GM Metric Ball Joint Housing

$72.90
Steel press-in ball joint housing, small metric GM

Wehrs Bump Stop Adjuster

$219.95
These adjusters allow you to run your bump stop package outside your shocks for quick tuning. The shaft slips apart