Showing 37–72 of 107 results

Show Filters

Allstar Screw-In Upper Ball Joint

$18.99
Most popular upper joint used. Originally used in Dodge, Chrysler and Plymouth cars. Fits Allstar ball joint holders and Lefthander

Allstar Brake Line Adapters -3 to ³/₁₆” Inv Flare, 2pk

$7.99
Brake Line Adapter – Clip-In – 3 AN Male to ⅜”-24 in Inverted Flare Female – Steel – Zinc Oxide

Allstar Steel Clevis

$12.49$14.99
Clevis, ⅜” wide with ⅜” or ½” hole.  ⅝” or ¾” RH Male Thread, Steel, Cadmium.

Allstar Cleco Pliers

$11.99
Unique tool easily installs and removes Cleco pins.

Allstar Adjustable Ride Height Strut 15″-24″

$95.99
Stick replaces the coil over shock and spring assembly during maintenance. Stick has many uses and may be adjusted to

Allstar Bearing Spacer

$52.99$62.99
Spacers fit between inner and outer bearings. Prevents over tightening and consistently set bearing pre-load while reducing bearing drag. Steel

Allstar Pistol Grip Grease Gun

$19.99
Allstar Performance Grease Gun 12 inch filler hose 14 ounce cartridges Steel, Zinc Oxide Air Bleeder Valve

Allstar Heel Riser

$19.99
Aluminum heel risers are pre-drilled for easy mounting and include a non-skid pad. 4½” wide.

Allstar Plastic AN Dust Cap Kits

$4.59$8.99
Allstar Performance Plastic Dust Caps -3AN to -16AN Kit Sizes include -3AN, -4AN, -6AN, -8AN, -10AN, -12AN, -16AN 5 of

Allstar Steel Spindle Nut Kit

$16.99
2″ pin kit for Allstar, Howe, PCR, and JOES 5 x 5 and most Wide 5 hubs includes a retaining

Allstar Lightweight Hood Pin, Pair, 3/8″ OD

$14.99
These lightweight hood pins are perfect for securing hoods, deck lids, service panels etc. 3/8″ Diameter 2-3/4″ Long 1-5/8″ Diameter

Allstar Brake Line Adapter

$9.99
Bulkhead style aluminum fittings adapt ³/₁₆” inverted flare line to an AN type fitting. The ⁹/₁₆” threaded body with attaching

Allstar Shock Eye Socket

$38.99
The ideal tool for shock rebuilders or anyone that disassembles shocks on a regular basis! Unique socket safely removes and

Allstar Helmet Vent Hose

$30.99
Helmet Air Hose, 4 foot Long, 1¼” Rubber Connectors, Gray.

Allstar Lug Nuts ⅝”-11, Steel, 10pk

$12.49
Large diameter, open end lug nuts are designed to fit most racing wheel applications and will not pull through the

Allstar Hose Adapter 2½” to 1¼”

$21.99
Adapter fits most helmet hoses with 1¼” ends and has a 2¾” O.D. to fit inside 3″ duct style hose

Allstar Stant Mini Recovery System Radiator Cap

$15.99
Allstar Radiator Cap Small Stant 28-32 PSI Higher cooling system pressure raises the boiling point of coolant to reduce the

Allstar Safety Wire Drill Fixture

$43.99
Accurately drill holes in fasteners allowing them to be mechanically locked in place with safety wire. Fixture accommodates most ³/₁₆”,

Allstar 3″ In-line Heavy Duty Duct Blower

$32.99
Many uses include cooling brake systems or assisting helmet cooling efforts. CFM ratings at 13.6 volts with a 3.5 amp

Allstar ³/₁₆” Torsion Clips, 10pk

$16.99
Allstar Performance Torsion clips, Steel, ³/₁₆”, 10 pack.

Allstar Tearoff Post Kit, 2 pk

$17.49
Unique aluminum tear off posts have a second set-screw locking the posts to the shield so they don’t continuously come

Allstar Wire Ties

$6.99$13.99
Secure electrical wiring, gauge lines and roll bar padding. 100 per bag. Available in lengths of either 7.25″ or 14.25″

Allstar Spark Plug Wire Retainer

$13.49
No more melted plug wires from hot exhaust. These aluminum retainers will neatly mount separated 4-wire sets to the front

Allstar Raised Bolt-On Front Motor Mount

$21.99
Use these mounts to raise the engine in the chassis instead of spacers and longer bolts. Use when changing from

Allstar 2″ Grease Gun Tip

$5.49
The 2″ tip allows for reaching tight areas such as U-joints. 2″ Tip replaces standard tip on most grease guns

Allstar Electric Fans

$92.99$109.99
Electric fans require very little amperage and are suitable for use in race car or tow vehicle. Fans are set

Allstar Radiator Inlet Fitting – 16AN

$22.99
Fitting, Radiator Inlet, Straight, 16 AN to 1⅝”-12 Male O-Ring, Aluminum, Clear Anodize, Allstar Radiators

Allstar Carburetor Gasket

$3.99
Allstar Performance Carburetor Base Plate Gasket, 4-Barrel, Open, Square Bore, Composite Material, Each.

Allstar Track Claw Tire Strengthener – 1 Gallon

$98.99
TRACK CLAW TIRE STRENGTHENER is designed to strengthen and vulcanize the rubber of the tire by becoming part of it

Allstar Quick Change Gear Cover Gasket

$2.99
Differential Cover Gasket, Paper, Quick Change

Allstar Brake Line Adapter Mounting, Bolt-On Tabs, 2 pk

$9.69
Secure brake line adapters with bolt-on brackets. Bolt-on bracket has two ³/₁₆” mounting holes.

Allstar Filler Hose 2¼” ID x 5′

$66.99
Fuel Cell Filler Hose – 2¼” ID – 5′ Long PVC – Clear

Allstar Heavy Duty Rivet Tool

$17.99
Includes interchangeable nose pieces for ³/₃₂”, ⅛”, ⁵/₃₂”, and ³/₁₆” diameter rivets. Easily serviced by removing retainer screw to clean

Allstar Deluxe Air Rivet Gun

$119.99
Heavy duty Air Rivet Gun can be used with steel or aluminum rivets from ³/₃₂” to ³/₁₆”.

Allstar 4AN Braided Steel Brake Lines with Aluminum Ends

$12.49$19.99
Allstar 4AN Braided steel lines have aluminum ends with one straight end and straight, 45° or 90° Female on the

Allstar Tire Siper, Heated

$229.99
Sipe tires quickly and effortlessly while maintaining precise control. Siping can greatly improve traction by allowing the tire to reach