Showing 1–36 of 107 results

Show Filters

Allstar Coated Steel Braided Brake Lines with Aluminum Ends, Straight/90°

$12.99$32.89
Black coated braided steel lines have black aluminum ends. -2AN, -3AN or -4AN Female straight on one end and straight

Allstar Quick Change Gear Plastic Carrying Tote

$7.99
Durable plastic quick change gear tote organizes extra gear sets and keeps them clean. Lid snaps shut to hold gears

Allstar Aluminum Hood Pin Kit

$11.99$13.99
Hood Pin kits come with 2 ea of Black Anodized Aluminum Pins, Scuff Plates, Torsion Clips, and 4 Jam Nuts.

Allstar Heated Tire Groover Blades

$18.99$21.99
Hard tempered spring steel blades are designed for use with the ALL10270 Heated Tire Groover. Blades are honed to a

Allstar Double Ended Drill Bits

$6.99
Double ended bits are basically two bits in one. Convenient bit can be flipped around for a fresh sharp bit

Allstar Brass Bolt-In Valve Stem

$4.99
Allstar Performance Valve Stem, Brass, ⅝” in rim hole, Bolt-In.

Allstar Stant 28-32 PSI Standard Size Non Recovery Radiator Cap

$18.99
The Stant Radiator Cap is designed to provide higher cooling system pressure which raises the boiling point of coolant to

Allstar Rubber Valve Stem, 0.453″ Hole, 4 Pack

$3.99
Economical rubber valve stems pull through wheel for easy installation. Small stem for .453″ hole is commonly found in stock

Allstar Racers Tape

$10.49
A must for all racers in the shop or at the track. True “Racer’s Tape”. Comes in white, red, black,

Allstar Track Mat, Black, 24″ x 52″

$44.99
Mats fold for easy storage and are ideal for use on asphalt, dirt, in the pits or on the garage

Allstar Safety Wire

$17.99
Stainless steel .032″ dia. wire comes in 1 lb. spool.

Allstar Pin Type Cleco Fasteners

$10.69
Cleco pins are reusable and easily make a temporary connection between pieces of sheet metal during fitting. Pins will work

Allstar Steel Tapered Spacers ½” ID

$4.29$4.59
Universal spacers have many uses including spacing rod ends on linkages to prevent binding or just to provide clearance. Spacers

Allstar Shock Travel Indicator Kit

$43.99$47.99
Check compression and rebound travel of coil-over shocks at a glance. Clamp aluminum bracket portion of the kit directly to

Allstar Black Gaffers Tape

$24.99
Vinyl coated gaffer’s tape has a dull appearance and is much stronger than standard racer tape.

Allstar Coil Over Bracket, Flat Mount

$7.89
Weld-on shock brackets mount standard and coil-over shocks with ½” I.D. inner bushing or ½” rod end to chassis as

Allstar Pit Extension w/ Hex Socket, ½” Drive

$49.99$51.99
No more extensions slipping off. 1″ hex socket is available in 5″ or 12″ lengths. Clears beadlock ring on Weld

Allstar Aluminum Quick Drain Pan

$54.99
Aluminum drain pan is handy when changing quick-change gears. Built-in perforated shelf holds gears and allows lube to drain into

Allstar Brake Duct Flange

$32.99
Brake Duct Flange mounts to the nose of your car using ³/₁₆” rivets and is rigid enough to use a

Allstar Safety Wire Pliers

$33.99
Never lose another race because of loose bolts. Rugged pliers feature an end bearing for smoother, faster twisting, especially in

Allstar Brake Ducts

$18.99$19.99
Ducts direct outside air to brakes, oil coolers, or the driver. 3″ O.D. with centered or offset outlets. Dimensions: https://allstarperformance.com/content/363.pdf

Allstar Aluminum Flange Type Tri-fold Rivet, 250 pk

$44.99$49.99
Tri-fold rivets have a perforated body that opens and expands to create a large backside surface area, eliminating the need

Allstar ⅛” Flat Tabs, 4pk, ¼” Hole

$8.99
Mild steel flat tabs have a straight edge and can be welded parallel to round tubing, square tubing or flat

Allstar Steering Shaft Support Kit

$11.99
Mounts to steering column bracket to hold steering shaft in place. Kit includes one rod end and two steel ¾”

Allstar Ground Clearance Indicator

$13.99
Determine how close the frame is to ground on the race track. These unique kits feature an aluminum bracket that

Allstar Grinding Disc Flat

$42.99
4″ 23 Grit ⅝ Arbor Grind off the hardened outer skin on used dirt track tires and create round, aggressive

Allstar Brake Duct Hose

$79.99
Flexible, non-kink hose directs air from front ducts to spindle ducts. 3″ I.D. Hose that withstands temperatures up to 300°.

Allstar Step Drill Bit Kit, 3pk

$19.99
Drill multiple size holes with one bit. Drill sheet metal and aluminum without deforming or distorting. Bits start on contact,

Allstar Ground Clearance Indicator Rods, 4pk

$9.99
Determine how close the frame is to ground on the race track. Replacement rods for Allstar Ground Clearance Indicator.

Allstar Push-Through Electric Fan Mount Kit

$9.99
Mounting kits are commonly used to mount electric fans, oil coolers, transmission coolers or honeycomb screen directly to a radiator.

Allstar Safety Window Nets

$24.99$26.99
Durable polypropylene nets are available in a variety of sizes and offer additional safety to the driver. Webbing is double

Allstar Screw-In Lower Ball Joint

$25.99
Fits Lefthander chassis style lower control arm or where a large screw-in type ball joint is required. (Replaces – Moog

Allstar Chevy V8 Motor Mounts

$9.99$13.99
Mounts are designed for fabricated chassis or stock chassis that have fabricated motor mounts attached to the frame. Solid style

Allstar Chrome Valve Stem Bolt-In

$3.99
Chrome bolt-in valve stem resists cutting during contact.

Allstar All-In-One Heated Tire Groover

$425.99
Self-contained groover has built-in temperature controls eliminating the additional cord and separate control box common with other groovers. Don’t let

Allstar Screw-In Lower Ball Joint Sleeve

$14.99
This ball joint sleeve is used in the construction of lower control arms and commonly referred to as the ‘Large