Showing 49–72 of 87 results

Show Filters

Allstar Carburetor Gasket

$3.99
Allstar Performance Carburetor Base Plate Gasket, 4-Barrel, Open, Square Bore, Composite Material, Each.

Allstar Track Claw Tire Strengthener – 1 Gallon

$98.99
TRACK CLAW TIRE STRENGTHENER is designed to strengthen and vulcanize the rubber of the tire by becoming part of it

Allstar Quick Change Gear Cover Gasket

$2.99
Differential Cover Gasket, Paper, Quick Change

Allstar Brake Line Adapter Mounting, Bolt-On Tabs, 2 pk

$9.69
Secure brake line adapters with bolt-on brackets. Bolt-on bracket has two ³/₁₆” mounting holes.

Allstar Filler Hose 2¼” ID x 5′

$66.99
Fuel Cell Filler Hose – 2¼” ID – 5′ Long PVC – Clear

Allstar Heavy Duty Rivet Tool

$17.99
Includes interchangeable nose pieces for ³/₃₂”, ⅛”, ⁵/₃₂”, and ³/₁₆” diameter rivets. Easily serviced by removing retainer screw to clean

Allstar Deluxe Air Rivet Gun

$119.99
Heavy duty Air Rivet Gun can be used with steel or aluminum rivets from ³/₃₂” to ³/₁₆”.

Allstar 4AN Braided Steel Brake Lines with Aluminum Ends

$12.49$19.99
Allstar 4AN Braided steel lines have aluminum ends with one straight end and straight, 45° or 90° Female on the

Allstar Tire Siper, Heated

$229.99
Sipe tires quickly and effortlessly while maintaining precise control. Siping can greatly improve traction by allowing the tire to reach

Allstar Helmet Fan

$79.99
Helmet Fan, In-Line, 12V, 1.3 amp, 20 cfm, Pigtail Connection, Black, Each

Allstar Aluminum Line Clamps, 10 pk

$5.49$7.99
Aluminum clamps have a protective neoprene cushion to prevent abrasion and a ¼” mounting hole to secure electrical wiring, hoses

Allstar Adjustable Fuel Log

$127.99
Adjustable fuel logs feature over 4″ of adjustment to work with a variety of dual inlet carburetors. Black anodized aluminum

Allstar Universal Lower Control Arm, Unwelded

$119.99
Universal kits are 2″ longer than standard arms and must be cut to length before welding slug into place. Ball

Allstar Engine Lift Plate

$14.99
Easy engine swaps with the Allstar Engine Lift Plate. Bolts to manifold in place of carburetor. Yellow zinc coated plate

Allstar Taper Reamers

$124.99$169.99
Repair or enlarge tapered holes to accept tie rod ends or ball joints. Reamers may be used in a drill

Allstar 2 Piece Aluminum Line Clamps, ³/₁₆”, 4 pk

$12.99
2-Piece aluminum clamps dress up wiring or hard line. Package of four.

Allstar Radiator Inlet Fitting

$22.99
Fitting, Radiator Inlet, Straight, 1½” Hose Barb to 1⅝”-12 in Male O-Ring, Aluminum, Clear Anodize, Allstar Radiators

Allstar 2″ Diameter Shock Covers

$37.99
These neoprene covers are perfect for protecting shock shafts and covering bump set ups. Fit 2″O.D. shocks Not for use

Allstar Chevy Bolt-On Rear Motor Mount, Raised 1½”

$18.99
Use these mounts to raise the engine in the chassis instead of spacers and longer bolts. Use when changing from

Allstar Step Drill Bit Kit, 2 pk

$37.99
  Step Drill Bit Size ¼”, ²⁵/₆₄”, ³⁵/₆₄”, ¹¹/₁₆”, ¹³/₁₆”, ⅞”, 1″, 1⅛”, 1 ⁷/₃₂”, 1¼”, 1⅜” ³/₁₆”, ¼”, ⁵/₁₆”,

Allstar ¼” Flat Tabs, ⅜” Hole, 4 pk

$13.99
Mild steel flat tabs have a straight edge and can be welded parallel to round tubing, square tubing or flat

Allstar Coil Over Bracket, Narrow

$6.99
Bracket welds parallel onto round tubing. Bracket is typically mounted above or below tubing and includes ½” shock mounting hardware.

Allstar Plastic Drum Pump

$22.99
Hand siphon drum pump dispenses or transfers low viscosity fluids from a 55-gallon drum. Self priming bulb delivers up to