Showing 25–48 of 49 results

Show Filters

Allstar Steel Clevis

$12.49$14.99
Clevis, ⅜” wide with ⅜” or ½” hole.  ⅝” or ¾” RH Male Thread, Steel, Cadmium.

JOES Jr Sprint Radius Rod Mount

$32.95
Our JOES Jr Sprint Radius Rod Mount bolts to your chassis and provides two machined slots that allow you to

JOES Double Shear Trailing Arm Bracket

$299.95
KEEP YOUR REAR IN CHECK with JOES new Double Shear Trailing Arm Bracket Our new billet aluminum, four bolt, double

QRC Kart Steering Block ¾”

$8.49
The Steering Block attaches the Steering Shaft to the Upper Steering Support.

JOES Shock Adapters

$54.95$76.95
JOES Shock Adapters  JOES Shock Adapters work exclusively with our 11403-V2 Trailing Arm Mount and allow you to run small

JOES Jr Sprint Upper Tank Mount

$34.95
Designed to mount your 2-gallon Jaz fuel tank to your Jr Sprint chassis. Made out of 6061-T6 Aluminum.

Sweet Mfg. Steering Rack Mounting Bracket

$64.29
Sweet Rack Mounting Brackets are hand made and fully welded by Sweet technicians. This bracket is a must when using

Allstar Brake Line Adapter Mounting, Bolt-On Tabs, 2 pk

$9.69
Secure brake line adapters with bolt-on brackets. Bolt-on bracket has two ³/₁₆” mounting holes.

JOES 1⅝” Clamp Reducer

$10.95
Reduce your 1¾” tube clamp Diameter to 1⅝”Diameter Works great with JOES Remote Oil Filter Mounts. Clamp is 1″ Wide.

Tiger 5×5 Brake Bracket Assembly

$96.95
Tiger 5×5 Brake Brackets fit cambered snouts and include all the necessary fasteners to bolt it to your axle tube.

JOES Jr Sprint Lower Tank Mount

$18.95
Holds the bottom of your JAZ Fuel Tank in place. Made out of aluminum.

JOES Rear Mount & Caliper Mount Installation Kit

$34.95
JOES Rear Mount Installation Kit makes mounting rear end brackets easy. We provide the correct drill and tap and give

Allstar ¼” Flat Tabs, ⅜” Hole, 4 pk

$13.99
Mild steel flat tabs have a straight edge and can be welded parallel to round tubing, square tubing or flat

Allstar Coil Over Bracket, Narrow

$6.99
Bracket welds parallel onto round tubing. Bracket is typically mounted above or below tubing and includes ½” shock mounting hardware.

Lefthander Clamp On Axle Mount Bracket For Panhard Bar

$57.49
Allows changes of roll center height by loosing up clamp and pivot bracket up or down Removable Caps Fits 3″

JOES Shock Eyelet Spacer

$17.95
JOES 1″ Wide Shock Eyelet Spacers reduce the diameter of your shock hardware from 1/2″ to 3/8″  allowing you to

PWR Pressure Can Mounting Bracket

$20.00
Designed for use with the PWR 4″ Pressure Can only Note: Bracket is included in the PWR75-00503 Pressurized Water Kit

Sweet Mfg. Aluminum Mount for LW Servo

$28.88
Red anodized aluminum mount for Sweet Mfg. Lightweight Servo

JOES JRP Junior Sprint Chassis Kit

$3,999.95
JOES JRP Chassis are built 100% in house to maintain our high quality standards. Capitalize on our years of in-house

Allstar Brake Pedal Plate-Floor

$19.99
Weld-in pedal plate is 23″ x 5″ x 1/8″ and speeds up race car construction by providing the proper spacing

Tiger Cambered Snout Screw

$1.49
Screws for the Tiger camber snout, available for steel or aluminum snouts.

Tiger Brake Bracket Screw

$3.95
Brake bracket screw for Tiger 5×5 and wide-5 brake brackets. Available screws for aluminum or steel brake brackets.

Allstar Upper Link Chassis Bracket

$27.99
Weld-on bracket has curved ¾” slots to maintain pinion angle as the 3rd link is raised or lowered. Bracket is

Smith Titanium Micro Sprint Bolt Kit

$1,456.99
Complete Bolt Kit for common Micro Sprint Chassis. Kit includes: Radius Rod and Shocks Kit (STPM-RR-SHK-KIT) Quantity Size (Thread x